Hits: 161
  1. Electronics Repair Form
  2. Pricing, Service, Cloning, Programming Information

Electronics Repair Form

Please Select Yes or No

Please login first if you do have an account

Please put your Full First and Last name

Email Invalid. Please add a Valid Email address

Please Provide Phone Number

Password needs at least 8 characters total, 1 Upper case, 1 Lower Case, 1 Number, and 1 Symbol

Create password to access Invoices under the Customer Portal. If you already have an account you have to login first before filling out this form


Password needs at least 8 characters total, 1 Upper case, 1 Lower Case, 1 Number, and 1 Symbol.

Password doesn't match

Please provide address

Please Enter City

Please Enter State

Please Enter Zip Code

Note:The price for testing a good unit(s) is non-refundable.

To help us process your repair accurately and avoid issues:

  • If your part tests good and no fault is found, a $100.00 up to $300.00 Bench Test / Diagnostic Fee (Depending on module) may apply instead of the full repair price. This is for the time going through the module testing everything. Some modules are more extensive to test on and that is why the base labor fee can range in price. (Semi trucks and Tractors and some commercial or industrial units are commonly the more complex modules most times)

  • Testing time is usually its a 3 to 4 day process in most cases. Especially modules that intermittent issues and not a hard fault. When something completely fails its easier to find the problem. Fees will be applied and adjusted on your invoice to reflect this and I will call you to let you know the cost before hand.

  • Please select only the issues you are actually experiencing and describe the symptoms in your own words in the “Describe issues with this module” fields.

  • For Vehicles, Scan your vehicle for codes before disconnection of battery or removal of unit. If no codes are present, let us know. Any stored or pending codes help confirm the fault and avoid delays in your repair.

  • Selecting the incorrect option here will be corrected on your invoice to the proper amount and will show on your invoice.

Please Call us if you have any questions. 678-951-2847 (All calls are recorded for quality purposes)
Invalid Input

Invalid Input

Invalid Input

Invalid Input

Invalid Input

Choose Service

The selection here will determine the deposit needed to get started on your module and to order any parts that are needed to repair. It may not be the final cost.
If the module test good, a base fee for testing will be applied and the rest of the deposit (if paid already) will be refunded.

Please Input 17 Digit VIN Number

(Type In VIN Number Below if you dont know Vehicle Weight. It will show by VIN Data Below)

Invalid Input. Numbers Only

Mileage needs to be absolute on what it shows on the dash. No exceptions.

Invalid Input

0

Invalid Input

Please select Yes or No

Choose Service

0

Invalid Input

Select Services Needed*
Select Services Needed
Please select at least one service

Please Select Yes or No

This is the vehicle data we got from from your VIN Number.

Invalid Input

Invalid Input

Invalid Input

Invalid Input

Invalid Input

Invalid Input

Invalid Input

Invalid Input

Invalid Input

Invalid Input

Invalid Input

Invalid Input

Upload a Image of the device here and the Connectors of the module.
 Also include any wire diagram PDF files of wire diagrams if you have it already for Tractors and other Equipment.
 Add anything you want to include.
All information possible to speed up your repair time.
Send us information that a shop has provided as well.

Please Upload Images of the module label, Connector, and Documents from other Shops you may have. All Information will speed up the process

Sign Above
Please Sign Form

By Signing, I give consent to CLG Performance and I understand this form and that Labor Cost is due at the time of Module Delivery to CLG Performance by mail or in person.

All Online Payments on this site have a 4% Processing Fee.
To Avoid Fees you can send payments to Zelle, CashApp, Venmo
Please text (678)951-2847 for details on paying without processing fees

0 Invalid Input

Choose Payment Method

After completion of the form and hitting submit, Please wait 20 seconds before trying to hit submit again. It takes a little bit of time to upload images to the server. You will see a confirmation page once everything uploads.

A Preview of what you will see on your Invoice:

Invoice preview will appear here…

Submit your electronics at the tab above.

Base Pricing and Information for Electronics Repairs

Diagnostics & Repair

Labor-based diagnostic fees start at $100 and up, depending on module type and complexity.
Diagnostic labor fees are non-refundable due to time spent testing and evaluating electronic modules.
If a replacement or programming solution is more cost-effective than repair, you will be informed before additional labor is performed.
If no fault is found, only the diagnostic labor fee applies (typically $100–$350 depending on module complexity).

Invoices are accessible through your customer portal: Customer Invoice Portal

What you see for the total $ is just a deposit on the repairs to get started and to order parts needed.
If nothing is wrong with your Electronic parts a labor fee of $100 to $300 testing fee will applied.
Testing fees depend on the level of difficulty of a module.

  1. Most Small cars and small trucks under 4K-lbs is $100.
  2. Bigger Vehicles over 4000 LBS up to 6000 LBS is $160 
  3. 6000 lbs to 14000 LBS is $200
  4. 14000 LBS and up is $300 which includes Semi and tractors

(All these prices are the labor only for testing if the module if they test good)

If you put down a deposit that is over these amounts above and it test good with no issues found, You will be refunded the difference back to you minus any transaction fees if you paid via Square Payment since they charge fees on transactions through them. This is why I prefer Zelle, CashApp, or Venmo in these cases for payments.

ECU & Module Programming / Cloning Services (ONLY with no repairs)

ECU, TCU, and Automotive module programming services start around $300 and up Depending on module type and what OE hardware we have to use and licensing we have to subscribe to like motorcraft service for Ford IDS or GM for Tech Connect, Mopar WiTech Services if we have to use the service.
If we are just cloning a module it is $220 if its a direct clone over with no need for OE programming.
In most cases, cloning preserves vehicle security data and eliminates the need for locksmith key programming.
Some modules require BDM programming, which involves opening the module. BDM cloning services typically start around $450.

Core Return Discounts

Core return discounts typically range from $5–$20, depending on module type.
If a replacement module is sourced externally, The suppliers core policies may apply and this will be relayed to the customer and put on their invoice

ECU, PCM, TCU & Vehicle Electronics Repair

Submit a repair request using our ECU repair form and include any diagnostic trouble codes or symptoms prior to module removal.
Many ECU issues are caused by sensors, wiring, or vehicle systems rather than the control module itself.
If module failure is confirmed, you may be instructed to ship the unit for professional evaluation.

Non-Automotive Electronics Repair

CLG Performance also evaluates select non-automotive electronics. Contact us to determine service eligibility.
 We can fix just about anything electronic including Industrial, commercial, Home, and Consumer Electronics, Chip Tuners, Programmers, and many other controls and devices. We are building the website repair form soon to take in these electronics as well

ECU / TCU Cloning & Data Retention Policy

Our goal is complete transparency and technical accuracy during ECU and module repair services.
In most cases, complete data cloning preserves custom tunes and calibration data.
Data loss occurs only when internal memory or processors are physically damaged or corrupted. I have found many modules that were incorrectly flashed and have corrupted data that cant be cloned. in some cases the only option is to flash back to stock using OE software and may need to be programmed in vehicle to sync all other modules. In those cases a locksmith may be needed to program back all the keys to the vehicle. Some vehicles need more than 2 keys in order to program a module and some vehicles may have to be taken to the dealership to get programmed in some cases

Hard-Coded ECU Serial Numbers

Some ECUs contain non-modifiable serial numbers. While data is cloned, tuning devices may remain locked to the original module, potentially requiring new tuning credits.

ECU Data Recovery From Damaged Modules

Data recovery may still be possible from burned, corroded, or physically damaged ECUs.
Contact CLG Performance before shipping to discuss recovery feasibility.

Module Handling & Submission Requirements

  1. Do not open or disassemble modules prior to shipping.
  2. All modules are photographed and documented upon arrival.
  3. Misrepresentation of module condition may result in service refusal.

ECU Photo Submission Requirements

Please provide clear photos before shipping:

  • Module label and part numbers
  • Connector side
  • Complete exterior housing

Photos ensure compatibility verification and faster service turnaround.

New Customer?

New customers can quickly create an account by registering here. Your account provides access to invoices, service updates, repair status, and exclusive promotions.
Invoices for completed ECU and electronics repair services are available through your customer account.
For questions regarding ECU repair, module cloning, or diagnostics, call or text 678-951-2847. Text messaging is preferred for faster response times.

All calls are recorded for quality assurance.