About | CLG Performance!
Automotive, Industrial, and Consumer Electronics Repair.
We repair ECU, PCM, BCM, Fuse Boxes, TCU, Radios, Car Amplifiers, and just anything you can throw at us.
We mainly repair automotive modules but we can fix just about any home electronics including washer and dryer control boards, HVAC control boards, Thermostat controls, Industrial controls like commercial freezers and control boards for commercial mailing systems, sorting machines, computer servers, security hardware, firmware updating, Commercial fireworks controls, music equipment, drones, and many other electronics unnamed here.. We have repaired many thousands of devices to save people and companies money. If you sent a device and someone says its not repairable just check with us and we will see what can be done.
Base pricing for electronics repair
Diagnostics & Repair
Labor-based diagnostic fees start at $100 and up, depending on module type and complexity.
Diagnostic labor fees are non-refundable due to time spent testing and evaluating electronic modules.
If a replacement or programming solution is more cost-effective than repair, you will be informed before additional labor is performed.
If no fault is found, only the diagnostic labor fee applies (typically $100–$350 depending on module complexity).
Invoices are accessible through your customer portal: Customer Invoice Portal
ECU & Module Programming / Cloning Services
ECU, TCU, and module programming or cloning services start at $220 and up.
In most cases, cloning preserves vehicle security data and eliminates the need for locksmith key programming.
Some modules require BDM programming, which involves opening the module. BDM cloning services typically start around $450.
Core Return Discounts
Core return discounts typically range from $5–$20, depending on module type.
If a replacement module is sourced externally, supplier core policies may apply.
ECU, PCM, TCU & Vehicle Electronics Repair
Need ECU, PCM, TCU, DME, or other vehicle electronics repaired?
Submit a repair request using our ECU repair form and include any diagnostic trouble codes or symptoms prior to module removal.
Many ECU issues are caused by sensors, wiring, or vehicle systems rather than the control module itself.
If module failure is confirmed, you may be instructed to ship the unit for professional evaluation.
Non-Automotive Electronics Repair
CLG Performance also evaluates select non-automotive electronics. Contact us to determine service eligibility.
ECU / TCU Cloning & Data Retention Policy
Our goal is complete transparency and technical accuracy during ECU and module repair services.
In most cases, complete data cloning preserves custom tunes and calibration data.
Data loss occurs only when internal memory or processors are physically damaged or corrupted.
Hard-Coded ECU Serial Numbers
Some ECUs contain non-modifiable serial numbers. While data is cloned, tuning devices may remain locked to the original module, potentially requiring new tuning credits.
ECU Data Recovery From Damaged Modules
Data recovery may still be possible from burned, corroded, or physically damaged ECUs.
Contact CLG Performance before shipping to discuss recovery feasibility.
Module Handling & Submission Requirements
- Do not open or disassemble modules prior to shipping.
- All modules are photographed and documented upon arrival.
- Misrepresentation of module condition may result in service refusal.
ECU Photo Submission Requirements
Please provide clear photos before shipping:
- Module label and part numbers
- Connector side
- Complete exterior housing
Photos ensure compatibility verification and faster service turnaround.
New Customer?
New customers can quickly create an account by registering here. Your account provides access to invoices, service updates, repair status, and exclusive promotions.
Invoices for completed ECU and electronics repair services are available through your customer account.
For questions regarding ECU repair, module cloning, or diagnostics, call or text 678-951-2847. Text messaging is preferred for faster response times.
All calls are recorded for quality assurance.
Owner: Chad L Gill
Category and Business Type:
- Automotive Vehicle PCM/Module Repair, Data Recovery, Cloning.
- Replacement Module Cloning, and other Aftermarket Automotive Electronics Repair/Cloning
- Industrial/Commercial Electronics repair
- Home Electronics Repair, HVAC Control Boards, Consumer Electronics Repair
- Misc Electronics Repair, Firmware recovery, Hacking and more!
Job Opportunities:
Please Click Here for Current Job Openings
Start Date:
Website Launched on October 3, 2015
Official Business Launched March of 2012
Mailing Address:
675 Gatewood Way.
Monroe, Ga 30656
This is a private address so please no unscheduled visits
Hours:
All service hours are posted up on our google page here
Holidays and Events availability will be posted VIA Facebook page and or Google
https://www.facebook.com/CLGPerformance/
Business Description:
Electronics Repair services. We will fix any kind of electronics even commercial, industrial, or home. Please check with us before mailing us your electronics.
Phone:
- Please Text My Phone or call. If I don't answer right away, please leave a message or text your question and your info.
678-951-2847
Email:
Facebook Web Address:
https://facebook.com/CLGPerformance
https://Facebook.com/ChadLGill
*Repairs by Appointment Only*